What we offer

We offer a variety of systems:

StokkerMill - Copper Wire Granulator

Swedish Steel, Italian engineering, British know how

Our range of copper wire granulators start at simple hand fed mills combined with an air bed separator to split the granulated copper from the plastic casing. These units come with either an air filters or more sophisticated cyclone air filtration systems. This type of unit is ideal for small users wanting to deal with typical household and smaller commercial cables.

These units can be upgrade to be able to deal with fine hair wire such as data cable by adding a turbo device. Larger users can add a pre-shredder and intelligent conveyor to allow bulk feeding of the machine. The units simply get bigger the more capacity you require.

Copper Granulator

Model	Power kw	Capacity kg	Filtration type		Turbo	Zig zag
Model	Power kw	Capacity kg	Filter	Cyclone	Turbo	Zig zag
SM1000STD	6.5	60-80	x
SM1100STD	8	80-100	x
SM1200CYC	8.5	80-120		x
SM2000T	20	100-150		x	x
SM3000STD	22	200-300		x
SM3000T	40	250-350		x	x
SM3000TZZ	44	250-350		x	x	x
SM5000STD	28	300-400		x
SM5000T	50	350-450		x	x
SM10000TZZ	90	750 kg/hr		x	x	x

Notes
All these machines are hand feed - see below for bulk feed. STD machines have just the Mill, Sorting bed and air filtration. Turbo machines are required to process fine hair wire such as data cable. Zig-Zag removes large copper particles before the turbo to reduce wear on the turbo.

Pre- Shredder

Model	Kw	Capatability
SM500	11	Upto and including SM3000STD
SM500	15	SM3000T / SM3000TZZ / SM5000STD
SM800	22	SM5000STD /SM5000T / SM5000TZZ

Notes
Pre- shredders allow the bulk feeding of the machine when combined with the conveyor.

Conveyor

Type
SC400

Note
Conveyors can be fitted with magnets to remove steel particles from the shred mix. The conveyor is linked to the motor load to allow the pre-shred to be loaded at a rate defined by the mill.

default:

high contrast:

blue and cream:

light and dark blue:

close options